Water Level Controller

Description

Water Level Controller is a state-of-the-art instrument to control water pumps. It controls your pump as per levels in the overhead and underground water tanks and also guards your pump against power fluctuations. It is a novel solution, ideal for all your water problems. The pump is Switched On when the overhead tank is empty. It is Switched Off when either the overhead tank is the full or the underground tank is empty. In addition to this, it has the provision to switch pump On and Off automatically as per the time of the day as well.

USE OUR Product  – save water  & Energy

SPECIFICATIONS:

POWER SUPPLY: 180 to 245V,50Hz, AC

SENSING: Through corrosion resistance, isolated 5V AC sensors or float sensors.

OUTPUT: 230V,50Hz, AC for 1HP motor and capacitor connection terminal for submersible pump.

DIMENSION (H*W*D) mm: 100*45*50

Light weight.

Low in cost.

Easy to install and operate.

INSTRUMENTS  OF WLC :

• WATER LEVEL SENSOR – These simple sensors are made of stainless steel and 5 Volt alternating current (AC) is used for water level sensing. Corrosion-resistant, lightweight & simple installation. Suitable for water used in home applications. 5Volt AC is used for sensing water level.
• FLOAT SENSOR – Float sensors are used in water pump controllers for monitoring and control of water especially water having less conductivity. Corrosion-resistant, lightweight & simple installation. Suitable for an acidic environment. Provide normally open(NO) and normally close(NC) operations.
• FLOAT LEVEL TRANSMITTER (4-20mA output) –  Float level transmitter ensures ceaseless level measurement up to 2 meters with a 4 to 20 mA signal output.  This liquid level sensor is made out of stainless steel and it is ideally suited for high temperature as well as pressure tank level operations with comparatively clean liquids such as diluted chemicals, lightweight oils in addition to water.

The Concept of WLC System:

 SS Controls manufactures a microcontroller-based fully automatic   Water Pump Controller is designed to sense and control most of the water pumps including submersible pumps. This device works 24/7/365 to maintain the level of water in the water storage tank at the defined level and to keep the water pump ON only when required.

When  connected to a Pump starter, performs the following functions automatically:

• Switches ON the Pump when the Water level drops below pre-set level (i.e. T2 level) in Overhead Tank.
• Switches OFF the Pump when the Water level in Overhead Tank becomes full (i.e. T1 level).
• Switches OFF the Pump when the Water level is low in Sump/Well/Borewell (i.e. S2 level).
• Switches ON the Pump when there is sufficient water in the Sump/ Well / Borewell (i.e. S1 level).
• Switches OFF the Pump when there is a Dry run (i.e. when water is not being pumped into Overhead Tank due to any reason).

Features:

• Fully Automatic Operation
• The pump is switched On/Off automatically as per level in the over-head and underground tanks
• Specially Designed Sensors
• Plastic molded non-corrosive, non-conductive, low power and electrically safe specially designed sensors are used to sense levels in the tanks.
• Multiple Pump Control
• Usually, societies have a standby pump. The Guard can alternate between pumps so that none of them is kept idle.

  Advantages Of WLC:

• Saves Power
• Using a water level controller saves power. This is because water levels are controlled automatically, which limits the amount of electricity used. As a result, less water and power are used to regulate a water supply. In an age where energy conservation is of utmost importance, using one of these devices is very beneficial.
• Saves Money
• Since a water level controller conserves power, it saves money, as well. Basically, water regulation is optimized through these devices, which means that wasted electricity and wasted water is kept at a minimum. That saves a substantial amount of money over time.
• Works Automatically
• Another big advantage is that these devices can work on their own. Thanks to timer switches, there is no need to operate them manually. This means that the frustrations involved with monitoring something like a water tank is minimized, and the water levels will be where they should be.
• Maximizes Water
• Additionally, water usage can be maximized with a water level controller. Often, water pumps get more use during the middle of the day. A water level controller is helpful because it automatically provides more water during the middle of the day and less water at night. As a result, water remains at its appropriate level at all times
• BENEFITS:
• User-Friendly and Easy Installation.
• Low Maintenance.
• Compact and elegant Design
• Save Water, Motor, and Energy.
• Saves Precious Man Power.
• Increase pump life & Safety.
• Avoid seepage of water from roofs and walls due to overflowing tanks.
• Prevent pump running dry.
• Ideal for difficult-to-access overhead tanks.
• Multi-Tank control applications.